Author Archives: Rushputin

About Rushputin

I've been painting minis for 30 years, and this is my hobby blog!

Ugh, Tank Platoons

I played a pre-league game last night with my French Resistance vs. Chris H’s Italians. Although we had a good time, I don’t think it was satisfying for either of us.

We checked against the Operation Torch theater rules and, with the layout of the table, selected Hold Until Relieved, with the crossroads piece as the objective.

Chris was running a Tank platoon: two M14/41s (light tanks) and three AB41s (armored cars) and some other stuff. I was running my Partisan list. One of the rules they’re using for the league is that Tank platoons are always Attacker against Mechanized and Infantry platoons (and Mechanized platoons are always attacker against Infantry platoons). (I suspect that my French Resistance, as almost all of it can fit in those trucks probably counts as ‘Mechanized.’)

Here’s the thing: he (almost certainly) could not win. With 3 units and maybe 14 models that could claim or contest the objective (vs my 8 units and 40 models). What’s the point of playing if you can’t win?

Similarly: although the game was effectively a lock for me, I had next to no agency in it. Those cars and tanks might be lightly armored, but that’s still enough to reduce my options for dealing with the vast bulk of his force to next to nothing (2 panzerfausts, a bazooka, a flame tank, and a mortar), none of which are Great (panzerfausts being 1 shot and Mortars being criminally unreliable leave me with hoping I get lucky on activations and maybe get to roll well with the bazooka and flame tank). What’s the point of playing if you can’t do anything?

(In the end, I killed one car, with the bazooka, and one tank, with a panzerfaust. I did get a lucky mortar shot, on another car, but it wasn’t enough to take it out.)

Like I said: it was a good time, but was unsatisfying.

Chris asserted that the difficulty he would face in winning the game was a balance to my difficulty in stopping him. He’s not wrong: it’s a balance, but it’s a rotten one, and dependent on the scenario. If we’d played a scenario out of Tank War, the tank platoon wouldn’t have the same challenges, but the infantry platoon’s lack of agency would still be present. More importantly, though: it’s Harrison Bergeron-style balancing. “Both of you are screwed; thus It is balanced” isn’t fun.

I’m not sure what the fix is. I simply believe Tank and non-Tank platoons should not mix, but a lot of the guys at the store have a lot of tanks and they want to play with their tanks, and I respect that. The leagues at the store are always going to permit Tank platoons, so refusing to play against other Tank platoons isn’t going to work (and would send the wrong message). I suppose I could play a Tank platoon myself, but I don’t want to do that right now.

Anyway, I’m mostly thinking out loud here.

Related/unrelated – I did have a lot of fun playing really aggressively and tactically with my trucks. Instead of just using them to rush up a bunch of grizzled partisans (and inevitably getting them blown up while doing so), I scooted them around, blocking approaches and providing cover. In the picture above, the truck really locked down that M14/41 from getting where it wanted to be for half the game.

Truck WIPs

1 Reply

Last summer, when I started putting together this Partisan list, I picked up a bunch of Ledo/Welly trucks. There are better, resin options, but they all run 3-4 times as expensive as just using what’s effectively an upscaled Matchbox car. I finally got around to painting them this weekend.

They started out looking like this (well, there was an orange gas, a blue tire, and a red beer, but still):

They’re not great, but they’re okay. Better than unpainted. Practice is practice. I’ve got a few more that are smaller (took me a couple of tries to figure out which scale worked better), so I might practice some more on them.

Definitely had some lessons learned in terms of applying the paint. Will definitely want to disassemble them and paint them in pieces next time. Finally, the automotive primer I like to use didn’t like the tires, which as far as I can tell are actual rubber. I had to gesso over them to get paint to stick.

I still have to figure out something clever to put on the side panels, then they’ll get a final lick of Dulcote, and I’ll put the windshields back in. I really ought to weather them, if only to cover up the airbrush mistakes.

Light Arch

2 Replies

Finally got around to assembling my light arch last weekend.

A light arch tutorial (Part 1, Part 2) made the rounds around DAHGS a month or so ago, and a couple of the guys followed it with success. I’d just had one of my LED lamp die (the light wouldn’t come on and I’d smell burning), so following the crowd was pretty easily justified.

I am incredibly satisfied with it. The photos really don’t do it justice at all. It’s amazing. Good lighting is key to a successful paintjob, and I suspect that the light arch will be almost as big of a hobby milestone for me as moving to a wet palette.

(Really, the photos don’t do it justice.)

I followed the linked tutorial pretty closely, with a couple of deviations.

My shopping list:

I also ended up with a bunch of T, L, and X connectors that simply didn’t get used in the build, but I’m sure they’ll be put to use later this year: now that Mrs. Rushputin has seen me do stuff with LEDs, she’s threatening to make me do the Christmas lights this year.

What’s nuts is I could have gone brighter and done the 5630 LEDs. I didn’t, because I was concerned about length and needing to double up on power adapters. In the end, I think I could have made it work, but really: not complaining.

Anyway: the tutorial talks about termination bars: that’s not a thing that gets used here in Virginia. Fortunately, Brett found these 8′ long aluminum bars at Lowes (but not Home Depot) that are thick enough to be sturdy but thin enough to be simply hand-shaped. I could have gotten them in 6′ lengths and probably would have been OK, but when I lined everything up I think they turned out more like ~6’8″, so the extra couple of bucks and a minute with a hacksaw turned out to be worth it.

Honestly, the hardest part of the entire build was bending the feet. I’m sure there’s an easier way to do it, but I just used pliers and brute force. If you can figure out a more effective way of doing that, I’d recommend it.

After getting the arches together, I sprayed them with white enamel paint. I should have give that paint longer to dry than I did; there are a few spots where it’s crackled, thanks to a second coat applied either too late or too early. Then, I bolted them to my desk; I have a dedicated paint station, so I can do that. Other folks have bolted it to pieces of wood, or you could just have it sit on your workspace.

Otherwise, the build followed the tutorial fairly closely. Hopefully, this is a legible articulation of how I wired it:

I used a connector wire to bridge the top bar at the intersection. This would have been easier with a shorter cable, I suspect, but it worked out okay.

Instead of just running LED along the edge, I used the 3′ connector wire to bridge the one arch to the other, and hid the cable with the cable concealer.

The LED strips are self-adhesive, but he’s not kidding when he says it’s not great. So, at every point where I could cut the strip (every 3 lights or so), I hot glue gun’d across the arch to hold it in place. I also reinforced every point where there might be some extra pull with zip ties.

The remote is key. The tutorial might claim it’s optional (but Highly Recommended). It’s not. Spend the $5 on it, or plan to fish around behind your desk to plug and unplug stuff when you want to turn the light off. The remote is little, though, so I mounted it to the side of a shelf with some velcro. It’s not going anywhere (but, like, if it had to it could).

Finally, I deliberately used a long-ass bolt to hold the arch together. This might seem counter intuitive (if I’m a picky enough pain in the ass to paint this thing, why wouldn’t I use a less obtrusive, more elegant, smaller thing to fasten these arches?), but I wanted the long bolt there so I could do stuff like this:

Mounting stupid crap to the top of the arch. I’m not saying I’m going to decorate it seasonally or anything… but I’m also not saying I’m not, if you know what I mean.

This was unbelievably easy to build, and the result is far more effective than I’d expected. If this is something you think you can use (and if you do work that requires good lighting), DO IT.

Bolt Action WWI Rules

Leave a reply

I’ll be running Amiens again at Madicon this weekend (Saturday morning, 9AM! Be there, or be somewhere else!), so I really need to get around to posting the dang updated lessons-learned rules (“Post BA WWI rules” has been in my to-do list all February). Then, I’ll just stick the PDF in a link on the side and that should be the last you hear of it for a while.

Bolt Action – Small Scale Rules Modifications

All measurements and ranges (formation, weapon ranges, morale, etc.) remain unchanged, with the following exception:

Movement

Basic move rate for infantry units is reduced to 4”. Running infantry units is 8”.
Vehicle movement is also reduced: 6” for tracked and half-tracked vehicles, 9” for wheeled vehicles.

This worked out about perfect. Carrying over weapon ranges feels just right, but 6″ movement felt all kinds of wrong at this scale. Stepping it down worked great.

Bolt Action – Great War Rules

General Rules

Barbed Wire

Obstacle. Does not block line of sight or provide cover. If an infantry unit Advances over it, roll a d6 – on a 1-2, the unit is Entangled: it must stop movement before crossing the barbed wire and takes a hit. An Entangled unit may not benefit from a Down order.

A section is removed when a tracked vehicle moves over it, or when a unit with the Pioneer rule and two or more models in contact with it at the start of their activation is given a Run order; this consumes all of the movement of those models. A tracked vehicle may only remove one section at a time (ie: it cannot drive over two adjacent sections) but may remove more than one section in a single movement (ie: drive over one line of barbed wire and continue on to drive over a second, third, etc).

This worked out fine. I don’t think it came up all that often, but barbed wire was an effective deterrent: the Germans used it in an attempt to control the flow of the British as much as they could. So: as expected.

Creeping Bombardment

This is a line across the width of the table. In the first turn, it activates first and advances from the British edge of the table. In subsequent turns, it gets its own Activation die. When it is activated, it will advance 2d6+6″ towards the German table edge.

Shooting across it provides heavy cover.

Any unit within 6″ of this line is Caught in the Bombardment – roll when giving the unit its order or when a unit moves to within 6″ of it. Units may go Down in response to being Caught in the Bombardment:

Exposed units may not be given a Rally order when Caught in the Bombardment.

After advancing the Creeping Bombardment, roll a die for any Barbed Wire sections now within 6″ of this line. On a 6+, remove it.

I had to throttle back on this table, big time. In my first playtest, even being Entrenched didn’t help much. Although this represents a bigger deviation from basing the table on being hit by a Heavy Howitzer, I think it worked better.

Bunkers

Up to 20 models may shelter in each bunker. Units in a bunker are never Caught in the Bombardment (but might be treated as such if they exit the bunker into the bombardment). Otherwise, bunkers are treated as buildings.

This didn’t come up in the game: nobody hid in the bunkers.

Gas Masks

A unit given an Ambush, Down, or Rally order may put on or take off their gas masks. (This applies to vehicles as well.)

A unit wearing gas masks may not be given Advance or Run orders. A vehicle may not be given a Fire, Advance, or Run order.

A model wearing gas masks is at a -1 penalty to hit with shooting and always fight last in Close Combat.

This didn’t come up in the game: gas wasn’t used at Amiens. I’d like to give them a try at some point.

Poison Gas

Poison Gas functions as a smoke fired from a Heavy Howitzer (6″). When a model is contacted by a poison gas cloud, roll a d6:

The model is wearing a gas mask: The model is killed on a 6. Veterans may reroll failures.
The model is wearing a gas mask: The model is killed on a 2+.

If a vehicle is ‘killed’ by this roll, treat it as a Knocked Out result.

This didn’t come up in the game: gas wasn’t used at Amiens. I’d like to give them a try at some point.

Reserves/Outflanking

Units may not be deployed in an Outflanking maneuver.

However, units brought on from Reserves may be brought in along the edge of the table at the trenches, with an additional -1 penalty for the trenches nearest their side of the table, and a -2 for the trenches furthest. This is decided when making the order check. So: a unit may be brought in from Reserve along the table edge at -1 morale, the near trench at -2, and the far trench at -3.

Originally, sides could bring in reserves from trenches that they “controlled” (so, once the British crossed Trench 1, the Germans could no longer bring in reserves from that trench and the British could). This update adds flexibility and risk-reward. I think it’ll work out.

Trenches

Units may not Run across trenches. Trenches provide Heavy Cover as if it were a building. When a unit is hit by an HE round in a trench, roll a d6 – on a 1-4, the Extra Protection rule is not ignored (on a 5-6, it is ignored as usual). To clarify: when a unit is hit by an HE round in a trench, on a 5-6, they require 6s to be wounded.

Units may fire at other units down the length of a Trench using true line of sight, but any model more than 6” away is always out of range.

At the beginning of the game, determine if trenches are wide. If trenches are wide, vehicles may not cross them except across a fascine.

These worked out as expected.

War to End All Wars

The scope of this conflict ranges for miles and miles and miles along the line along the front. When an Order Die is removed from the bag (because a unit is eliminated) it may be recycled. To recycle an Order Die, select a dead, non-vehicle unit from casualties (or assemble an infantry squad from casualties): non-vehicle, non-team units recycle on a 3+, vehicles and units with the Team rule recycle on a 5+.

If you succeed, the unit is placed into Reserves at the beginning of the next turn. If you fail, the Order Die is removed from the game. You do not have to immediately recycle the Order Die.

This was the big lessons-learned from the game: by allowing the players (especially the Germans) to infinitely recycle their units, effectively removing any consequences from losing a unit. “I’ll run the flammenwerfer forward: if it dies, that’s okay! It’ll be back next turn!” This will help keep things from being hopeless but will make using a unit, especially a Team, still hurt.

Army Special Rules

Britain

Mark V*s

The Mark V* tank had space to transport infantry; this was not done in practice because the conditions were awful. On disembarking from a Mark V*, its passengers immediately take d3 pins and must test before being able to complete their Order.

Mark V*s were lengthened to handle wider trenches; as such they never require fascines to cross trenches.

The British declined to use these as transports, and the trenches weren’t wide so neither of these came up.

Germany

K Bullet

After June 1917, German machine guns get +1 Penetration against tanks.

This was, I think, key to the Germans not just being miserable all game. It gave them capability to deal with the British tanks.

Stormtrooper

German NCOs may not be removed with exceptional damage.

I don’t remember if it came up or not. Exceptional damage is an important rule, but could slow things down in a larger game so I’m tempted to remove it entirely.

Sandbagging

4 Replies

I’d been unhappy about how my Partisan MMG looked: too much empty space on the base. After seeing this picture of some French Resistance:

I decided to solve the problem with sandbags.

I’d remembered John saying something about making sandbags with teabags (and that’s about all I remembered). So: I sculpted some chiclets out of apoxie sculpt (I used black here because I had some and I hate it: never buy black apoxie sculpt unless you want black fingertips).

Then, I snipped emptied out some teabags and chopped them out into squares. A quick soak in some watered-down glue, then folded it around the block.

I’d expected the teabag to provide texture, and it does, a little, but really where it’s really been useful is in how it behaves like cloth. Folds, wrinkles: that sort of thing.

After everything dried, I superglued them together while placing them on the model, then brushed over the teabags with it as well.

They’re not perfect, but for a first attempt I’m pleased. Where it falls short is the chiclets: they’re inconsistently thick, and a little too brick-y.

Next time, I’ll try to get them more consistent, and with rounder, baggier shapes. I think that’ll be the key If I can time right, I’d try to catch the chiclets mid-cure: firm enough to be manipulated but soft enough to be shaped so they sit like bags.

Might even try doing the teabag-mache with them at that stage; I think that can only help make them look like they have weight to them.

The Dreadcoats are coming! The Dreadcoats are coming!

Leave a reply

I built these guys up probably back in 2014 and finally got around to painting a batch of them in early 2015. No clue how in the name of George Washington have I not gotten around to posting them until now.

Talk about Muskets & Tomahawks kicking off again at Huzzah reminded me that I needed to get pictures of them, even if I probably won’t use them for that purpose.

Anyway: Dreadcoats. Simple conversion: Perry AWI British Infantry with Necron heads.

I have a very clear idea of what I want to do with these guys. I just need to force some hobby bandwidth and do it. All of this predates Sleepy Hollow, believe it or not, but boy-howdy does that capture the spirit of my vision.

The Dreadcoats will be accompanied Hexians (get it? Like Hessians?), which still need to see some paint:

They’re also simple conversions: Ghouls with Beastman heads and Perry AWI British hats and muskets.

Suitably gnarly. Vile King George III would have gotten his soul’s worth when binding these foul spirits to the defeat of patriots.

“Long sobs of autumn violins…”

1 Reply

“… wound my heart with a monotonous languor.”

I’ve been pretty busy on the hobby front lately, and although I keep meaning to do a Wednesday workbench I’ve wrapped whatever I’ve been working on before I remember to take a picture. This is better than the alternative, though, right?

It’s been Partisans for the past several weeks. I picked up a bunch over the summer (right before the move, because I am an idiot with poor judgement), and with Amiens in the rear-view I’m finally able to start working on them.

We’re doing an Eastern Front league out at Huzzah, so I’m running them as “Partisans (The Good Kind),” which is to say they’re along the lines of the Bielski Partisans. They’re ultimately intended to be French Resistance/FFI/Maquisards, though; I’m waiting until the league ends before going back through and painting on the tricolor armbands.

These are almost all Artizan Designs, with a couple of Victory Force minis in there (they’re the weapon teams primarily, and that’ll be the next batch).

I’m quite pleased with them. I’ve been using the tri-color toning on their faces; although some have come out better than others, I’ve yet to be disappointed by the results. Unfortunately, said results haven’t been photographing very well. See for yourself:

I’ve also built (but have yet to paint) some objectives and IEDs (in Bolt Action, partisans get explosive markers they can place on the board). They’re based the same way the rest of the force is, but with a bit more interest in the base with the curb. One’s a fallen Type C container (with wires to look like parachute cord), one’s a stack of illegal newspapers, and one’s a suitcase radio transmitter.

I’m in pretty good shape with them. One, maybe two, batches of people left to paint. Then a trio of trucks (that want a little more work) and a couple of looted vehicles (an IZM armored car and a CV-33 Lanciaflamme tank) and I’m done!

UPDATE: Got a game in with them last night, and took the opportunity to snap a quick photo of their overall progress. Like I said: almost there!

Remember the Alamo!

2 Replies

I’d forgotten (to post) about it.

We were in Texas over Thanksgiving and got to spend a day in San Antonio before returning to Virginia. At my request, we got to spend a little time at the Alamo; we haven’t been back there since before our wedding.

The diorama was, honestly, the primary reason. What’s weird is I distinctly remember seeing a diorama at the Alamo last time, in 2006, but apparently the one there now was installed in 2009. At the very least, the one there now is glorious.

2,000+, 1:32 scale. Lavishly detailed down to the smallest details. And, according to the article above, done simply as a labor of love by some crusty old dude who just wanted to make something beautiful.

What I’m saying is: this is what I want to do when I get old.

John Basilone

Leave a reply

During Snowzilla (aka “Make Winter Great Again”), I painted up the Warlord John Basilone figure for the “We’re snowed in, so let’s have a painting contest” DAHGS painting contest.

I’m pleased with it, even if the mouth didn’t photograph particularly well.

It was a little disconcerting how few of the WWII buffs at the store knew who he was (“He’s going to have a bad time trying to fire that gun that way.” Well, yeah.) Those guys probably should remember that it wasn’t Europe War II; I think I’ll blame Flames of War for that.

Amiens, Aug 8, 1918

Leave a reply

The Amiens game (finally) went down on Sunday with, it appears, great success. Everyone had a good time, the rules held up (there were notes, but when wouldn’t there be), and things went smoothly (the game took ~4 hours, with 6 players and 43 Order Dice, so I think that counts as “speedy”).

I’ll post up the rules in a separate post, but I think they held up well; the smaller scale worked great and most of the period specific rules also accomplished what they needed to.

Casey, John, and Rhett were the Germans, desperately trying to hold off the British as long as they could; Gavin, Keith, and Steve were British trying to break through the German lines.

The Germans deployed: a lot more thought went into the placement of Barbed Wire than I’d anticipated. Many of the German units deployed into Ambush, forgetting that the push would be preceded by a Rolling Bombardment. (Note: because there were 43 Order dice, we used regular dice and used the chart. Black was German, White was British, Red was the Bombardment,)

Between the bombardment and nearly every German unit starting the game with an Order, Turn 1 was pretty much a British show. The Brits decided to lead with all of their tanks, holding the infantry back for subsequent turns.

While the bombardment was effective in suppressing the defenders, it slowed the attackers down: advancing too far too fast killed a Mark V.

The defenders fired Minenwerfers relentlessly at Tanks but weren’t able to hit a single. one. all game long. Machine Guns, with the K Bullet, were more effective (I’m pretty sure that one died to a Machine Gun).

The attackers had a tough time making progress on their left, but the Australians along the right made more headway. (Yes, the Australians were on the other side of the Somme from the British; I wanted Australian troops, so I gave them Australian troops.)

The “infinite reserves” rule I used kept things from being hopeless and boring for the Germans, but it made consequences too slight: it’ll be the first thing that gets tweaked.

The German presence along their right was solid….

Which meant their left was where the decisive action would take place.

The Brits were able to push into the second trench line, in the end.

At Turn 6, the Brits had established a foothold in the second trench line, and the game ended.

Per scoring (which also needs some tweaking), it was a blowout for the Germans: although the British made headway, their progress was too slow.

The Table:

I did most of this, but got some significant help from Steve & Rhett. This is a concession: this isn’t what the German lines looked like in the Summer of 1918, but it certainly feels a lot more WWI-trenchy, and will, hopefully, see quite a bit of use in other battles. They’re two 4’x2′ boards; we got clever while laying them out: the two red Xs above line up: in the future, we’ll be able to line them up side-by-side with two more boards across the front for a wider battle, and we’ll be able to spin the front line around and place a third board across the middle for a more standard 6’x4′ table. All the trenches are duckboarded; the second line is built along the edge of a road, with hairpins, and two bunkers back by the orange !s.

I made a billion barbed wire stands: plasticard crosses supporting 28 gauge wire spun into circles. I’ll probably redo the wire: I had a marker to wrap them around, which meant they’re uneven. I also, before game, painted up the crashed Sopwith. Why is there a crashed Sopwith? Because I wanted a crashed Sopwith.

I’m hypercritical of myself, so all I can see are where things fell short of where I’d wanted them, but I really did hit a point where I just said, “Screw it; close enough.” Maybe I’ll circle back around and punch up some things, but there’s definitely going to be some things I just live with.

I’m going to revise the rules a smidge; I’ll run it again at Madicon in March and then Historicon (Cold Wars isn’t in the cards for me this year).

I’m pretty glad to be done with the game, though: I’ve been working on this thing since September: it’s dominated my hobby time and I’m ready as hell to be working on something in 28mm again… as well as to be working on something that isn’t Amiens.

Here’s a photodump of some pictures some other folks took (Casey, Steve, Keith):

Warpstone Pile

The TIGER-FORCE at the core of all things!

Author Archives: Rushputin

About Rushputin

Ugh, Tank Platoons

Truck WIPs

Light Arch

Bolt Action WWI Rules

Bolt Action – Small Scale Rules Modifications

Bolt Action – Great War Rules